Matrix SETU VFX88L System Manual page 152

Matrix
• Default, Authentication User Password will be blank.
Outbound Proxy Server Status:
• Enable this field if the ITSP service provider has a SIP outbound
server to handle calls.
• Default, Outbound Proxy Server is disabled.
Outbound Proxy Server's Address:
• It is the address of the Outbound Proxy Server. It can be IP address
also. This may be same as the SIP Server address since the SIP
server might also be acting as Outbound Server.
• Enter maximum 48-characters including extended ASCII characters.
• Default = Blank.
Outbound Proxy Server's Port:
• It specifies the Outbound Proxy Server's listening port number for
SIP. SE may change this field if the ITSP provides an Outbound
Proxy Server port number other than the default.
• Range = 1024-65535. This may be same as SIP Server's Port.
• Default = 5060.
Use STUN:
• Use STUN if ITSP doesnot provide Outbound Proxy.
• If STUN is used, configure the STUN Server Address and STUN
Server Port in Network Port Parameters.
• Select: Yes/No.
• Default: No.
OG Preferred Vocoders:
• To reduce the packet band width occupied in the RTP for the
speech, the gateway supports following types of Vocoders and it is
default sequence:
• G.729
• iLBC
• G.723
• GSM
• G.711 (μ-Law)
• G.711 (A-Law)
152
System Manual
SETU VFX88L/VFX44L V1