Run Program(s) Manually
NOTE: To run a program manually, please follow the
instructions below carefully. Unlike other ESP
controllers, ESP-LX+ and -LXi+ controllers have
completely independent programs. Therefore, you
must select a program before you press the MAN.
START / ADV. button.
Turn the dial to AUTO.
The display shows the day of the week and time of day.
Press PGM until the program you want is displayed.
Press MAN. START / ADV. to start the selected program.
If you want to run additional programs, repeat steps 3 and
4. Each program you select will run when the previous
program has ended. You can stack all four programs to
run in sequence.
To cancel all programs currently selected to run, turn the
dial to O.. for three seconds. Then turn the dial back to
AUTO.
34
ESP-LX+ & LXi+ Installation, Programming, & Operation Guide