Rain Bird ESP-6LX+ Installation, Programming, And Operation Manual page 28

“DELAY” appears in the display momentarily, followed by
the delay time.
If the program you want is not displayed, press “PGM”
until it appears.
Press ñ or ò to set the delay time. To cancel station
delay, set the delay time to zero.
NOTE: The display initially shows the delay time in
seconds (“SEC”). When you advance past 59
seconds, the display changes to “MIN” for minutes
and seconds. When you advance past 60 minutes,
the display changes to “HOUR” for hours and
minutes.
To set delays for additional programs, press “PGM” until the
program you want appears. Repeat step 6.
Turn the dial to “AUTO.”
NOTE: During the delay between stations, the
master valve / pump relay is not active. See page 26
for instructions on setting the master valve / pump
relay.
ESP-LX+ & LXi+ Installation, Programming, & Operation Guide 25