Set Station Watering Times
You can set any station to run from 0 to 12 hours. .or the first
two hours, you can set the watering time in one-minute incre-
ments. .or the remaining 10 hours, you can set the watering
time in 10-minute increments.
On 12-, 16-, 20-, and 24-station models, set the STA-
TIONS slide switch to the block of stations you want to set.
Turn the dial to the station number you want in the
WATERING TIME PER STATION section of the dial.
The display shows the program, the station number, and
the currently set watering time. If the station has been
included in another program, USED appears in the
display.
NOTE: If USED appears, you can still set a watering
time for the station unless the station has been
previously assigned to the D-drip program. Stations
assigned to the D-drip program cannot be used by
any other program.
ESP-LX+ & LXi+ Installation, Programming, & Operation Guide
19
Need help?
Do you have a question about the ESP-6LX+ and is the answer not in the manual?
Questions and answers