User Authentication; Authentication Method; Pages Always Can Be Accessed - Epson TM-P20II Reference Manual

7. User Authentication

7.1

Authentication Method

Web Config uses the administrator user name and password to perform user authentication. This same password is also used for
locking the device's control panel and for EpsonNet Config password authentication. If a password is not configured,
administrator rights are granted for all access to Web Config. The various states of administrator authentication are shown below.
Administrator password is
configured
Administrator password is not
configured
7.2

Pages Always can be Accessed

The following pages are accessible all the time regardless of the administrator's logon status.
Tab menu
Status
Table 7-1 Administrator authentication state
Administrator user name is
configured
Authentication is requested.
Transit to "Administrator Password
Setting" page.
Table 7-2 Pages Always can be Accessed
Product Status (contains Software Licenses)
Network Status
sage Status
Hardware Status
Administrator user name is not
configured
Authentication is requested. However,
the administrator is not required to
enter a user name.
Displays the "Set Administrator
Password" page.
Sub menu
15