Application Options - Keysight Technologies N5249A Configuration Manual

PNA Family Network Analyzer Upgrade Kits

Application options

Upgrade kits are available to add options after initial purchase. To upgrade the PNA-X/PNA/PNA-L, order the corresponding
item number. The model and serial numbers of the instrument to be retrofitted are required as part of the order.
Description
Measurement applications
Automatic fixture removal
Time-domain measurements
Noise figure measurements using standard receivers
Fully-corrected noise figure measurements
for PNA-X, 2-ports
Fully-corrected noise figure measurements
for PNA-X, 4-ports
Frequency offset
Scalar-calibrated converter measurements
Vector- and scalar-calibrated converter measurements
Embedded LO measurements
Gain compression application
Intermodulation distortion application
Source phase control
Differential and I/Q devices application
Spectrum analyzer
Extended spectrum analyzer to 110 GHz
Extended spectrum analyzer above 110 GHz
Active hot parameters (export-controlled version)
Active hot parameters
11
Integrated true-mode stimulus application
N-port capabilities
1 For measuring frequency converters, Option 082 or 083 is required.
2 Requires configurable test set for signal conditioning of noise figure measurements using standard receivers. Therefore it is not available with N522xA-200, -210,
-400 and -410.
3 Upgrading N5244A units with noise figure hardware requires serial-number prefixes of 5204 or higher, and upgrading N5245A units requires serial-number prefixes of
5205 or higher. For these two models, units with lower serial-number prefixes can be traded in for credit towards a new unit with the noise figure hardware.
4 Two-tone signal must be routed to R1 receiver after an external combiner; therefore it is not available with N522xA-200, -210, -400 and -410.
5 When used with an external signal generator, configurable test set is required to access a receiver. Therefore it is not available with N522xA-200 and -210.
6 To connect a multiport test set, configurable test set is required. Therefore it is not available with N522xA-200, -210, -400, -410, and N523xA-200, and -400.
7 The Windows 7 upgrade kit for PNAs containing CPU version 6 is model N8983A. This upgrade kit contains a new solid state drive with all of the necessary software
installed. For units with older CPUs, order the N8984A with Option PC7. This upgrade kit contains a new solid state drive and a version 7 CPU. For adding Option 090
to units with DSP version 4, add Option SP5 to the N8983A or N8984A order to get the DSP version 5.
8 A configurable test set is required for VMC measurements (to connect a reference mixer) or for SMC+Phase measurements using the comb-generator-based calibration.
When ordered with N522xA-200, -210, -400 and -410, Option 083 adds phase and delay measurements only by using SMC+Phase with a calibration mixer.
9 Optional receiver attenuators are recommended to avoid receiver compression for large-signal measurements.
10. Option 093 is a subset of Option 094; therefore they cannot be ordered together.
11. Some parameters are is restricted to 50 GHz.
Find us at www.keysight.com
Required Option
7
Windows 7 OS .
Option 080
1,2
Option 080 and for N5241/42/49A, one of Op-
tions 219, 224 or H85
For N5244/45/47A, 080 and 224
Option 080 and for N5241/42/49A, one of Op-
tions 419, 423 or H85
For N5244/45/47A, 080 and 423
Option 080
Option 080
8
Option 082 or 083
See Footnote 1
Option 080
1,4
See Footnote 5
Option 080 and 400, 401, 410, 417, or 419, and
Windows 7 OS
7
Option 080, Windows 7 OS, and
DSP version 5
7, 9
10 Option 090. Not available with N5241/49A or
N5221A
Option 090. Not available with N5241/49A or
10
N5221A
Option 080 and 400, 400/419, or 400/419/423
Option 080 and 400, 400/419, or 400/419/423
Option 400, 401, 417, 419, or 423
See Footnote 6
(continued)
For PNA-X
Series
N524xAU-007
N524xAU-010
N524xAU-028
N524xAU-924
1 .
N524xAU-929
1 .
N524xAU-080
N524xAU-082
N524xAU-083
N524xAU-084
N524xAU-086
N524xAU-087
N524xAU-088
N524xAU-089
N524xAU-090
N524xAU-093
N524xAU-094
N524xAU-110
N524xAU-111
N524xAU-460
N524xAU-551
For PNA For PNA-L
Series Series
N522xAU-007 N523xAU-007
N522xAU-010 N523xAU-010
N522xAU-028 n/a
n/a n/a
3
n/a n/a
3
N522xAU-080 N523xAU-080
N522xAU-082 N523xAU-082
N522xAU-083 n/a
N522xAU-084 n/a
N522xAU-086 n/a
N522xAU-087 n/a
N522xAU-088 n/a
N522xAU-089 n/a
N522xAU-090 523xAU-090
N522xAU-093 n/a
N522xAU-094 n/a
n/a n/a
n/a n/a
N522xAU-460 n/a
N522xAU-551 N523xAU-551
User
Installable
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page 22