For Devices With Type-N Connectors - Keysight Technologies N5249A Configuration Manual

For devices with Type-N connectors

Mechanical calibration kits
85054B standard: DC to 18 GHz. Includes:
– 00909-60011 Type-N (m) fixed lowband load
– 00909-60012 Type-N (f) fixed lowband load
– 85054-60025 Type-N (m) short
– 85054-60026 Type-N (f) short
– 85054-60027 Type-N (m) open
– 85054-60028 Type-N (f) open
– 85054-60031 Type-N (f) to 7mm adapter
– 85054-60032 Type-N (m) to 7mm adapter
– 85054-60037 Type-N (f) to Type-N (f) adapter
– 85054-60038 Type-N (m) to Type-N (m) adapter
– 85054-80010 Type-N (f) sliding load
– 85054-80009 Type-N (m) sliding load
– 85054-60050 Type-N (f) connector gage
– 85054-60052 Type-N (f) gage master
– 85054-60051 Type-N (m) connector gage
– 85054-60053 Type-N (m) gage master
85054D economy: DC to 18 GHz. Includes:
– 85054-60025 Type-N (m) short
– 85054-60026 Type-N (f) short
– 85054-60027 Type-N (m) open
– 85054-60028 Type-N (f) open
– 85054-60031 Type-N (f) to 7mm adapter
– 85054-60032 Type-N (m) to 7mm adapter
– 85054-60037 Type-N (f) to Type-N (f) adapter
– 85054-60038 Type-N (m) to Type-N (m) adapter
– 85054-60046 Type-N (m) fixed load
– 85054-60047 Type-N (f) fixed load
Adapter sets
– 85130C 3 5 mm 2 to Type-N
Electronic calibration kits
N4431B Microwave ECal: 300 kHz to 13.5 GHz, 4-ports.
Includes:
– Option 020 module with:
N4431-60007 4 x Type-N (f) ECal module
1 Special rugged female connector specifically for connecting to the
network analyzer test port, but does not mate with a standard male
connector.
2 For use with E8362C.
Find us at www.keysight.com
N4431B-xxx mixed-connector options:
Connector type Port A
option
3.5 mm (f) 101
3.5 mm (m) 102
Type-N 50 ohm (f) 103
Type-N 50 ohm (m) 104
7-16 (f) 105
1
7-16 (m) 106
1
N4432A Microwave ECal: 300 kHz to 18 GHz, 4-ports. Includes:
– Option 020 module with:
N4432-60003 4 x Type-N (f) ECal module
N4432A-xxx mixed-connector options:
Connector type Port A
option
3.5 mm (f) 101
3.5 mm (m) 102
Type-N 50 ohm (f) 103
Type-N 50 ohm (m) 104
N4690B Microwave ECal: 300 kHz to 18 GHz, 2-ports.
Includes:
– Option M0F module with:
N4690-60004 Type-N (f) to Type-N (m) ECal module
– Option 00M module with:
N4690-60005 Type-N (m) to Type-N (m) ECal module
– Option 00F module with:
N4690-60006 Type-N (f) to Type-N (f) ECal module
– Option 00A adds:
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
Cables
2
Use the test port cables recommended for devices with 7 mm
connectors, and 7 mm to Type-N adapters that are from the
85054B/D Type-N calibration kit (see 7 mm connector section).
Port B Port C Port D
option option option
201 301 401
202 302 402
203 303 403
204 304 404
205 305 405
206 306 406
Port B Port C Port D
option option option
201 301 401
202 302 402
203 303 403
204 304 404
Page 33