Accessories, Calibration Options - Keysight Technologies N5249A Configuration Manual

PNA Family Network Analyzer Configurations
PNA-X Series
N5249A 10 MHz to 8.5 GHz
N5241A 10 MHz to 13.5 GHz
N5242A 10 MHz to 26.5 GHz
N5244A 10 MHz to 43.5 GHz
N5245A 10 MHz to 50 GHz
N5247A 10 MHz to 67 GHz
Application options
(continued)
To add options to a product, order the corresponding item number (N52xxA-xxx).
Description
Pulse, antenna, mm-wave
Pulsed-RF measurements
Add IF inputs
Add pulse modulator to internal 1st source
Add pulse modulator to internal 2nd source
Add four internal pulse generators
Fast CW sweep
Nonlinear vector network analysis
Nonlinear component characterization
Nonlinear component characterization
Nonlinear X-parameters
2
Nonlinear pulse envelope domain
Arbitrary load-inpedance X-parameters

Accessories, calibration options

To add options to a product, order the corresponding item number (N52xxA-xxx).
Description
Accessories
Rack mount kit for use without handles
Rack mount kit for use with handles
Pulse I/O adapter
Comb generator
1
Calibration software
Perpetual license for built-in performance test
software for Keysight inclusive calibration
Perpetual license for built-in performance test
software for standard compliant calibration
Calibration documentation
ISO 17025 compliant calibration
Commercial calibration certificate with test data
ANSI Z540 compliant calibration
1. To configure NVNA, requires two comb generators with power supplies, Keysight
calibration kits (mechanical or ECal), power meter and sensor or USB power sensor.
Requires EXG, MXG or PSG for X-parameter extraction (PNA-X 10 MHz reference
output can be used for 10 MHz tone-spacing applications).
2. X-parameters is a trademark and registered trademark of Keysight Technologies in
the US, EU, JP, and elsewhere. The X-parameters format and underlying equations
Find us at www.keysight.com
PNA Series
N5221A 10 MHz to 13.5 GHz
N5222A 10 MHz to 26.5 GHz
N5224A 10 MHz to 43.5 GHz
N5225A 10 MHz to 50 GHz
N5227A 10 MHz to 67 GHz
For PNA-X Series For PNA Series For PNA-L Series Additional Information
N524xA-008
N524xA-020
N524xA-021
N524xA-022
N524xA-025
N524xA-118
1
N524xA-510
4
N524xA-511
4
N524xA-514
5
N524xA-518
N524xA-520
For PNA-X Series For PNA Series For PNA-L Series
N524xA-1CM
N524xA-1CP
N1966A
U9391C/F/G
N524xA-897
3
N524xA-898
3
N524xA-1A7
N524xA-UK6
N524xA-A6J
(continued)
N522xA-008 n/a
N522xA-020 n/a
N522xA-021 n/a
N522xA-022 n/a
N522xA-025 n/a
N522xA-118 n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
N522xA-1CM N523xA-1CM
N522xA-1CP N523xA-1CP
N1966A n/a
n/a n/a
N522xA-897 N523xA-897
N522xA-898 N523xA-898
N522xA-1A7 N523xA-1A7
N522xA-UK6 N523xA-UK6
N522xA-A6J N523xA-A6J
are open and documented. For more information, visit
find/eesof-x-parameters-info.
3. Additional hardware required. Please refer to the analyzer's Service Guide for required
service test equipment.
4. Pulse capability requires option 021 and 025
5. Pulse capability requires option 021, 022 and 025
PNA-L Series
N5239A 300 kHz to 8.5 GHz
N5231A 300 kHz to 13.5 GHz
N5232A 300 kHz to 20 GHz
N5234A 10 MHz to 43.5 GHz
N5235A 10 MHz to 50 GHz
Requires Option 025
Requires one of Option 224, 400, 401, 417, 419, or 423
Requires Options 419 and 080, or 400, H85 and 080
Export-control version. Requires Options 419 and 080, or
400, H85, and 080
Requires Options 423 and 510 or 511, requires MXG or PSG
except 10 MHz tone-spacing
Requires Options 021, 025 and 510 or 511
Requires Option 514, requires MXG or PSG except 10 MHz
tone-spacing
Additional Information
http://www.Keysight.com/
Page 7