Air Lift Performance 3P Installation Manual page 46

Display
BRIGHTNESS
Set the brightness for the display while in use.
1. Level 1-10
2. Use the up and down buttons to increase
or decrease luminosity in 10% increments.
3. Level 7 (default)
BRIGHTNESS SLEEPING
Set the brightness for the display after it goes
into sleep mode.
1. Level 0-10
2. Use the up and down buttons to increase
or decrease luminosity in 10% increments.
3. Level 4 (default)
SLEEP TIME
Set the amount of time it takes to revert back
to the main screen and for the display to go to
sleep.
1. 5-60 seconds.
2. Use the up and down buttons to increase or
decrease time in 1-second increments.
3. 10 seconds (default)
ALL-UP BUTTON
Set function for the all-up button.
1. All-up (default)
2. Front-up
3. Preset
ALL-DOWN BUTTON
Set function for the all-down button.
1. All-down
2. Front-down
3. Preset
4. Air-out (default)
UNITS
Set units of measure to PSI or BAR.
1. PSI (default)
2. BAR
8
3H/3P User Guide
MN-948