Table of Contents
Advertisement
2.2 Technical Specifications
CPU
®
Intel
Atom D2550 @1.86GHz, 1MB Cache, 10W TDP
®
Intel
Atom N2800 @1.86GHz, 1MB Cache, 6.5W TDP
®
Intel
Atom N2600 @1.6GHz, 1MB Cache, 3.5W TDP
Chipset
Intel
®
NM10 Express Chipset
Memory
Up to 4GB Single-Channel DDR3 / DDR3L 1066MHz soldered onboard (*)
(up to 2GB Single-Channel with N2600)
Embedded Graphics
®
Integrated Intel
HD Graphics controller
Dual independent display support
Video Interfaces
HDMI or Multimode Display Port interface
18/24 bit single channel LVDS interface
Additional VGA interface (optional external adapter is required)
Resolutions
N2xx CPU
HDMI, CRT:
Up to 1920x1200
Display Port:
Up to 1600x1200
LVDS interface:
Up to 1366x768
Mass Storage
Up to 2 x external S-ATA channels
Optional SD / SDIO interface
Optional SATA Flash Disk soldered onboard, up to 120GB (**)
* Please notice that total amount of 4GB would be usable only with 64-bit OS. Total
amount of memory available with a 32-bit OS depends on the OS itself.
** Please consider that for HDD and Flash Disk manufacturers, 1GB = 10^9 Byte.
Some OS (like, for example, Windows) intends 1GB = 1024^3 byte, so global
capacity shown for Disk Properties will be less than expected. Please also consider
that a portion of disk capacity will be used by internal Flash Controller for Disk
management, so final capacity will be lower.
USB
Up to 8 x USB2.0 Host ports
Ethernet
Gigabit Ethernet interface
Audio
HD Audio interface
PCI Express
3 x PCI-e x1 lanes
Serial Ports
1 x Optional Serial port (TTL interface)
Other Interfaces
I2C bus
LPC Bus
SM Bus
Thermal / FAN management
D2550CPU
Optional SPI interface
Up to 1920x1200
Power Management Signals
Up to 2560x1600
Power supply voltage: +5V
Up to 1440x900
Operating temperature:
Dimensions: 70 x70 mm (2.76
Supported Operative Systems
Microsoft
Microsoft
Microsoft
± 5%
DC
0°C ÷ +60°C ***
"
"
x 2.76
)
®
®
Windows XP 32-bit / Microsoft
Windows 7 32-bit
®
®
WES2009 32-bit / Microsoft
WES7 32-bit
®
WEC7 32-bit / Linux Ubuntu 12.04
*** Temperatures indicated are the minimum and maximum temperature that
the heatspreader / heatsink can reach in any of its parts. This means that it is
'
customer
s responsibility to use any passive cooling solution along with an
application-dependent cooling system, capable to ensure that the
heatspreader / heatsink temperature remains in the range above indicated.
Please also check paragraph 5.1.
Advertisement
Table of Contents
