Table of Contents
Advertisement
4.3 Advanced configuration
After the selection of this choice, it will appear the table shown on the right:
The selections mentioned in the table are just as an example; they can be
different from default values.
Most fields allow two selections:
Disabled / Enabled
i.e., there is only the chance of enable or disable corresponding operations during
the system boot.
4.3.1 RAM test execution
This option allows you to disable RAM test execution during boot phase, in order
to allow a faster boot up of the system.
4.3.2 Display tests behaviour
When "Disabled", it eliminates the message visualisation during initial test.
4.3.3 Wait for F1 on error
When "Enabled", in case of any error during the boot phase (including loss of CMOS data), the system halts waiting that the customer press F1 on keyboard to
enter setup menu and continue.
4.3.4 Ignore keyboard error
When "Enabled", in case of keyboard error during the boot phase, the system proceeds with the normal boot sequence.
4.3.5 USB Keyboard after boot
During the boot, USB keyboard is always enabled. After this phase, the status of USB keyboard will depend from the settings of this menu item.
4.3.6 NumLock State at Boot
This option allows you to define the NUMLOCK state at Boot, delineating working mode of numeric keypad.
QuadMo747-x2000
QuadMo747-x2000 User Manual - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2014 SECO S.r.l.
47
Advertisement
Table of Contents
