M Echanical Specifications - Seco SECOCQ7-mITX2.0 User Manual

SECOCQ7-mITX2.0
Page 11
User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.
2.3 Mechanical specifications
According to miniITX form factor, board dimensions are: 170 x 170 mm (6.693" x 6.693").
The printed circuit of the board is made of six layers; some of them are ground planes, for
disturbance rejection.
®
In order to fix the Qseven module to the carrier board, on SECOCQ7-mITX2.0 have been
soldered four metallic spacers, height 4mm, 2.5mm diameter.
Two spacers (those closer to MXM connector) are always present, the other two spacers can be
® or μQseven ®
factory configured for fixing of Qseven modules: this factory alternative has been
done since the spacers needed for fixing of μQseven ®
modules would interfere with electronic
®
devices soldered on standard Qseven modules.
Considering your possible scenarios, please take notice of what kind of modules you could use,
before purchasing one of the two possible configurations.
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0