Boot Video First From - Seco Qseven QuadMo747 x2000 User Manual

4.3.11 Boot video first from

This item allows selecting which device must perform first the video boot up sequence.
Possible choices are PCIe (PCI Express x1) or IGD (Internal Graphics Display).
4.3.12 Show Graphic Logo
This option allows you to enable the visualisation of the graphic logo (a bitmap image 640x480 pixel in 16 colours) during the first steps of boot-up sequence. This
image can be customised.
4.3.13 Watchdog Timer time-out
This option allows you to enable the embedded microcontroller's Watchdog, and in case which is the time-out for its timer (possible choices are 1', 2', 4', 8', 16',
32' and 64').
4.3.14 Watchdog Timer action
This option allows you to choose the way the system must behave when the Watchdog time out occurs. It can have no reaction (NONE); it can simulate, for the
O.S., a pulse on Power Button signal (PWB pulse); it can go in Soft Off (S5) state directly or it can simply reset the board.
4.3.15 Watchdog Timer signalling
This option allows you to enable or disable the assertion of external watchdog signal WDOUT when the time-out occurs.
QuadMo747-x2000
QuadMo747-x2000 User Manual - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2014 SECO S.r.l.
49