Introduction - Seco Qseven QuadMo747 x2000 User Manual

2.0 compliant module with the intel atom cedarview family cpus and intel nm10 express chipset

Table of Contents

2.1 Introduction

QuadMo747-x2000 is a CPU module, in Qseven

with Hyper Threading capabilities and 64-bit instruction set.

These CPUs also integrate in a single chip the memory controller, which gives support for up to 4GB of DDR3 Memory soldered onboard (with N2600 CPU the limit

is 2GB), and a high performance 2D and 3D GPU, able to drive up to two independent display using native interfaces available on the module: HDMI, LVDS and

CRT.

The chipset of the board is Intel

NM10 Express Chipset, which completes the features of this compact and versatile board.

The board is completed with up to 4GB DDR3L directly soldered on board, and one optional SATA Flash Disk, directly accessible like any standard Hard Disk, with

up to 120GB of capacity (SATA Flash Disk is alternative to second SATA Channel on Qseven

This high level of integration allows an extremely reduced consumption of spaces, that is essential for boards with sizes so reduced as for Qseven

offers all functionalities of standard PC boards in just 70x70mm.

Interface to the board comes through the single card edge connector, as defined by Qseven

Gigabit Ethernet, one optional SD/SDIO/MMC interfaces, up to 2 x SATA Channels, up to 8 x USB 2.0 ports, 24-bit Single Channel LVDS, HDMI or multimode

Display Port interface, 3 x PCI-Express x 1 lanes, HD Audio interface, I2C, SPI and SM buses, and other features, like optional UART and SPI interfaces.

Interfacing to the board comes through a single card edge connector, as defined by Qseven

described. For external interfacing to standard devices, a carrier board with a 230-pin MXM connector is needed. This board will implement all the routing of the

interface signals to external standard connectors, as well as integration of other peripherals/devices not already included in QuadMo747-x2000 CPU module.

Please refer to following chapter for a complete list of all peripherals integrated and characteristics.

QuadMo747-x2000

format, based on the Intel

Atom Cedarview family of CPUs, N2000 and D2000, a series of Dual Core CPU

connector).

specifications Rel. 2.0: on this connector, signals are available for

specifications Rel.2.0, where are carried out all interfaces previously

boards, which

Table of Contents