Instructions To Control The Display; F180 (Scr): Screen Display Instruction, Number Of Steps: 9 - Panasonic AFPE224300 User Manual

4.2 Instructions to control the display

4.2.1 F180 (SCR)
Screen display instructions in the N and S modes of FP-e unit
The FPWIN GR wizard facilitates the programming.
S1: Used to specify the registration screen.
S2: Used to specify the head of the screen display control data (3 words).
S3: Used to specify the data displayed in the upper section
(Numerical values are displayed only in 16-bit.)
S4: Used to specify the data displayed in the lower section.
(Numerical values are displayed only in 16-bit.)
Example:
F180 (SCR), K0, DT0, EV0, SV0
Registration of N mode 1
Control data: DT0, DT1, DT2
Upside display data: EV0
Downside display data: SV0
- Available memory areas A: Can be specified
Display mode and
S1 No. (0 to 3 can be
specified.)
Head address of the
S2 area to specify the
display measure.
Area which stores
the data to be
S3
displayed in the
upper section.
Area which stores
the data to be
S4
displayed in the
lower section.
Note: Special register "DT9***" cannot be specified for the lower section display data "S4."
This instruction cannot be used in the interrupt program.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
: Screen display instruction, Number of steps: 9
st
screen
WX WY WR
A A
A A
A A
N/A A
N/A: Cannot be specified
SV EV DT IX
A A A A
A A A A N/A
A A A A
A A A A
(Unit: Word)
IY K H
A A A A
N/A N/A N/A
A A N/A N/A
A A N/A N/A
Index
modifier
A
A
A
A
4-3