Calendar Timer; Area For Calendar Timer; Setting Of Calendar Timer Function - Panasonic AFPE224300 User Manual

2.5 Calendar timer

2.5.1 Area for calendar timer

With the clock/calendar function, data indicating the hour, minute, second, day, year
and other information stored in the special data registers DT9053 to DT9057 can be
read using the transmission instruction and used in sequence programs.
Special data
Register No.
DT9053 Hour data
H00 to H23
DT9054 Minute data
H00 to H59
DT9055 Day data
H01 to H31
DT9056 Year data
H00 to H99
DT9057
Note:
1. The area above is available for the FP-e unit with a calendar timer function.
2. The value is not fixed initially when the battery is connected. Set the appropriate value to the calendar
timer.
Lithium battery is included in the FP-e unit, but it is not connected to the unit. Connect the battery to the
unit before using the FP-e controller.
3. Put in a new battery within a minute after removing the old battery.
4. A calendar timer is available only when a battery is installed.

2.5.2 Setting of calendar timer function

There are two ways to set the calendar timer function as described below.
- Setting using FPWIN GR
1. Press the [CTRL] and [F2] keys at the same time, to switch the screen to [Online].
2. Select "Set PLC Date and Time" under "Tool" on the menu bar.
PLC Date and Time setting dialog box
2-10
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Upper byte Lower byte
Minute data
H00 to H59
Second data
H00 to H59
Hour data
H00 to H23
Month data
H01 to H12
Day- of - the-
— week data
H00 to H06
The above steps display the "Set PLC Date and
Time dialog box" shown on the left. Input the date and time, and
click on the "OK" button.
Reading Writing
Available Not available
Available Available
Available Available
Available Available
Available Available