Panasonic AFPE224300 User Manual page 180

Num-
Name
ber
F149 Message
P149 display
F150 Data read
P150 from intelli-
gent unit
F151 Data write
P151 into intelli-
gent unit
F152 Data read
P152 from
MEWNET-F
slave station
F153 Data write
P153 into
MEWNET-F
slave station
F154 Machine
P154 language
program call
F155 Sampling
P155
F156 Sampling
P156 trigger
F157 Time addition
P157
F158 Time
P158 substruction
F159 Serial data
P159 communica-
tion
F161 Serial data
P161 reception (for
MCU COM
port)
11-82
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Boolean Operand
MSG S
PMSG
READ S1, S2, n,
PREAD D
WRT S1, S2, n,
PWRT D
RMRD S1, S2, n,
PRMRD D
RMWT S1, S2, n,
PRMWT D
MCAL n
PMCAL
SMPL -
PSMPL
STRG -
PSTRG
CADD S1, S2, D
PCADD
CSUB S1, S2, D
PCSUB
MTRN S, n, D
PMTRN
MRCV S, D1, D2
PMRCV
Description
Displays the character constant of "S" in the
connected programming tool.
Reads the data from the intelligent unit.
Writes the data into the intelligent unit.
Reads the data from the intelligent unit at the
MEWNET-F (remote I/O) slave station.
Writes the data into the intelligent unit at the
MEWNET-F (remote I/O) slave station.
The machine language program is called.
Starts sampling data.
When the trigger of this instruction turns on, the
sampling trace stops.
The time after (S2+1, S2) elapses from the time of
(S1+2, S1+1, S1) is stored in (D+2, D+1, D).
The time that results from subtracting (S2+1, S2)
from the time (S1+2, S1+1, S1) is stored in (D+2,
D+1, D).
This is used to send data to or receive data from an
external device through the specified CPU COM
port or MCU COM port.
Data is received from external equipment via the
COM port of the specified MCU.
Steps
13
9
9
9
9
3
1
1
9
9
7
7