Panasonic AFPE224300 User Manual page 178

Num-
Name
ber
F142 Watching
P142 dog timer
update
F143 Partial I/O
P143 update
F144 Serial data
communica-
tion control
F145 Data send
P145
F146 Data receive
P146
F145 Data send
P145
F146 Data receive
P146
F145 Data send
P145
F146 Data receive
P146
F147 Printout
F148 Self-
P148 diagnostic
error set
11-80
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Boolean Operand
WDT S
PWDT
IORF D1, D2
PIORF
TRNS S, n
SEND S1, S2, D, N
PSEND
RECV S1, S2, N, D
PRECV
SEND S1, S2, D, N
RECV S1, S2, N, D
SEND S1, S2, D, N
RECV S1, S2, N, D
PR S, D
ERR n
PERR (n: k100 to
K299)
Description
The time (allowable scan time for the system) of
watching dog timer is changed to "S" × 0.1 (ms) for
that scan.
Updates the I/O from the number specified by "D1"
to the number specified by "D2".
The COM port received flag (R9038) is set to off to
enable reception.
Beginning at "S", "n" bytes of the data registers are
sent from the COM port.
Sends the data to another station in the network
(MEWNET).
Receives the data to another station in the network
(MEWNET).
Sends the data to the slave station as the MOD
bus master.
Receives the data from the slave station as the
MOD bus master.
Sends the data to the slave station as the
MEWTOCOL master.
Receives the data from the slave station as the
MEWTOCOL master.
Converts the ASCII code data in the area starting
with "S" for printing, and outputs it to the word
external output relay WY specified by "D".
Stores the self-diagnostic error number "n" in
(DT9000 for FP0/FP-e/FP1/FP-M/FP3 or DT90000
for FP0 T32/FPΣ/FP2/FP2SH/FP10SH), turns
R9000 on, and turns on the ERROR LED.
Steps
3
5
5
9
9
9
9
9
9
5
3