Panasonic AFPE224300 User Manual page 214

Table of Syntax Check Error
Error
Name
code
Syntax
E1
error
Duplicated
E2
output
(Note)
error
Not paired
E3
error
Para-meter
E4 mismatch
error
E5 Program
(Note)
area error
Note) This error is also detected if you attempt to execute a rewrite containing a syntax error during RUN.
In this case, nothing will be written to the CPU and operation will continue.
11-116
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Opera-
tion Description and steps to take
status
A program with a syntax error has been
written.
Stops
⇒ Change to PROG. mode and correct
the error.
Two or more OT(Out) instructions and
KP(Keep) instructions are programmed
using the same relay.Also occurs when
using the same timer/counter number.
⇒ Change to PROG. mode and correct
the program so that one relay
Stops
is not used for two or more OT
instructions,Or, set the duplicated output
to "enable" in system register20. A
timer/counter instructon double definition
error will be detected even if double
output permission has been selected.
For instructions which must be used in a
pair such as jump (JP and LBL), one
instruction is either missing or in an
Stops
incorrect position.
⇒ Change to PROG. mode and enter
the two instructions which must
be used in a pair in the correct positions.
An instruction has been written which
does not agree with system register
settings. For example, the number
setting in a program does not agree with
Stops
the timer/counter range setting.
⇒ Change to PROG. mode, check the
system register settings, and change so
that the settings and the instruction
agree.
An instruction which must be written in a
specific area (main program area or
subprogram area) has been written to a
different area (for example, a subroutine
Stops
SUB to RET is placed before an ED
instruction).
⇒ Change to PROG. mode and enter
the instruction into the correct area.
A A A A A A A A A
A A A A A A A A A
A A A A A A A A A
A A A A A A A A A
A A A A A A A A A
A:Available