Panasonic AFPE224300 User Manual page 110

FP-e
Relay No.:
Matsushita
IEC
R9030
Not used
%MX0.903.0
R9031
Not used
%MX0.903.1
R9032
Not used
%MX0.903.2
R9033 Print instruction
execution flag
%MX0.903.3
R9034 RUN overwrite
complete flag
%MX0.903.4
R9035
Not used
%MX0.903.5
R9036
Not used
%MX0.903.6
COM port
R9037
communication error
%MX0.903.7
flag
COM port reception
R9038 done flag during
general-purpose serial
%MX0.903.8
communication
COM port
transmission done
R9039
flag during general-
%MX0.903.9
purpose serial
communication
High-speed
R903A
counter control
%MX0.903.10
flag
High-speed
R903B
counter control
%MX0.903.11
flag
High-speed
R903C
counter control
%MX0.903.12
flag
High-speed
R903D
counter control
%MX0.903.13
flag
R903E
%MX0.903.14
R903F
%MX0.903.15
11-12
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
-
-
-
Off: Printing is not executed.
On: Execution is in progress.
Goes on for ony the first scan following completion of a
rewrite during RUN operation.
-
-
Goes on is a transmission error occurs during data
-
communication.
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in
-
general-purpose serial communication.
Goes off when transmission is requested in general-
-
purpose serial communication.
Turns on while the high-speed counter instructions
ch0 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
ch1 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
ch2 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
ch3 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
-
-
Description