Heart Rate Sensor; Speed Sensor Bluetooth® Smart And Cadence Sensor Bluetooth® Smart - Polar Electro V650 User Manual

Heart Rate Sensor

Connector: Detach the connector from the strap after every use and dry the
connector with a soft towel. Clean the connector with a mild soap and water
solution when needed. Never use alcohol or any abrasive material (eg. steel
wool or cleaning chemicals).
Strap: Rinse the strap under running water after every use and hang to dry.
Clean the strap gently with a mild soap and water solution when needed. Do
not use moisturizing soaps, because they can leave residue on the strap. Do
not soak, iron, dry clean or bleach the strap. Do not stretch the strap or bend
the electrode areas sharply.
Check the washing instructions on the label of the strap.
Speed Sensor Bluetooth ® Smart and Cadence
Sensor Bluetooth ® Smart
Clean the sensors with a mild soap and water solution and rinse them with
clean water. To maintain the water resistance, do not wash the sensors with a
pressure washer. Do not immerse the speed sensor or cadence sensor in
water. Never use alcohol or any abrasive material such as steel wool or
cleaning chemicals. Avoid hard hits to the sensors, as these may damage the
sensor units.
95