Calibrate Kéo Power - Polar Electro V650 User Manual

Calibrate Kéo Power
Calibrate Kéo Power before starting your session. V650 starts the calibration
automatically each time the transmitters wake up and V650 is found. The
calibration takes a couple of seconds.
The temperature of your training environment affects calibration
accuracy. If you're going to train outdoors, for example, take your bike
outdoors half an hour before doing the offset calibration. (This way your
bike's temperature is about the same as that of your training environment.)
To calibrate Kéo power:
1Choose the bike to which the sensor is linked and return to the main view
by tapping
2Wake up the transmitters by rotating the cranks to start the calibration.
3Keep the bike upright and cranks in place until calibration is completed.
To ensure the calibration is done properly:
•
Do not put any weight on the pedals during calibration.
•
Do not interrupt the calibration.
When the calibration is complete a green LED will blink on the transmitters,
and you can start your session.
. Keep V650 in the main view during the calibration.
39