Pair Cadence Sensor With V650 - Polar Electro V650 User Manual

•
Improves your cycling technique and identifies your optimal cadence
•
Interference-free cadence data lets you evaluate your individual
performance
•
Designed to be aerodynamic and light

Pair Cadence sensor with V650

Make sure the cadence sensor has been correctly installed. For more
information on installing the cadence sensor refer to the user manual of the
cadence sensor.
1. Go to General Settings
less than three meters from the sensor you want to pair. It's close enough
when it's mounted on the handlebar.
2. Activate the sensor you want to pair. Rotate the crank a few times to
activate the sensor. The flashing red light in the sensor indicates that you've
activated the sensor.
Do the pairing within 30 seconds of the sensor activation.
3. V650 lists the devices it finds. The device closest to V650 is at the top of the
list. Tap the device you want to pair.
4. Pairing succeeded
5. Link the sensor to
later in Paired devices.
When you select a bike for a ride, your V650 automatically starts searching for
the sensors you've linked to the bike. V650 is ready once the green circle around the
sensor indicator is static.
> Pairing >
tells you that the pairing is complete.
Bike 1, Bike 2, Bike 3
Pair new device. The V650 should be
or Bike 4. You can change the bike
36