Polar Electro V650 Getting Started Manual

How to get started
Set up your new Polar V650 in the Polar Flow web service. To get the 6. Let your computer install any suggested USB drivers. The Polar
most accurate and personal training data, it's important that you're FlowSync recognizes your V650 as a new device and opens Polar
precise with the settings in the setup. Flow web service in your internet browser.
7. Create a Polar account or sign in if you already have one.
1. Plug in your V650 to your computer's USB port with the USB
cable. It may take a few minutes for your V650 to start charging.
8. Click Done to synchronize your settings between the V650 and
the Polar Flow web service. FlowSync status will change to
2. Turn on your V650 by pressing and holding the side button.
completed, once the synchronization is done.
If you use Mac OS X, you must enable the compatibility 9. If there's a firmware update available for your V650, we
mode for Mac OS X on your V650. Go to Settings > General
recommend you install it during the setup.
settings. Scroll to the bottom and choose About V650.
Scroll down again and choose your computer's operating
system: Mac OS X. Restart your V650 to save the setting.
For more detailed instructions see the V650 support pages
at support.polar.com/en/V650.
3. Go to flow.polar.com/start and download the Polar FlowSync
data transfer software, which you need to connect your V650 to
the Flow web service.
4. Open the installation package and follow the on-screen
instructions for installing the software.
5. Once the installation is complete, FlowSync opens automatically.
Please note that it may take some time to establish the
Fully charging the battery takes up to five hours.
connection between your V650 and the computer.
Get to know your V650 Bike mount
1. Press the side button You can install the bike mount on the stem or on the left- or right-
to view the following hand side of the handlebar.
options:
» Sync with mobile 1. Place the rubber base on the stem/handlebar.
» Calibrate altitude 2. Position the bike mount on the rubber base so that the POLAR
» Lock display logo is in line with the handlebar.
» Search for
1 3. Secure the bike mount on to the stem/handlebar with the
2
sensors O-ring.
14:25 100%
» Turn off V650
HISTORY SETTINGS
2. Swipe down to open Latest
3 4
the pull-down menu.
126
km
There you can adjust
the front light, the
FAVORITES PROFILE
training sounds and
Mountain biking
5
the display brightness.
6
Bike 3
3. See the details of
your sessions and the
7
totals of your cycling
history.
4. Modify the settings to 4. Align the ledges on the back of V650 with the slots on the bike
suit your needs. mount and turn clockwise until V650 is in its place.
5. Enable Strava Live
8
Segments® or choose
a route for your ride.
Add segments you've downloaded from Strava and
routes to your Favorites in the Flow web service
and sync them to your V650.
6. Choose the profile and the bike for your ride.
7. See the status of GPS and sensors.
8. Press the front button to start recording, press and hold it to
pause.You can also set the button to take a lap.
H10 heart rate sensor
Training with your V650
When you use our heart rate sensors when riding, you get the most Choose the profile you want to use. Keep your V650 still with the
out of Polar's unique Smart Coaching features. Heart rate data
display facing upwards until it finds the GPS satellite signals. This
gives you an insight into your physical condition and how your body typically takes 30-60 seconds the first time. On future occasions it
responds to training. This will help you fine-tune your training plans should take only a few seconds. V650 is ready once the green circle
and achieve your goals more effectively. around GPS is static. Press the front button to begin your ride.
DURING TRAINING
Wear the comfortable strap and connector around your chest to
get your heart rate accurately and in real time on your V650.
The bright color touch screen allows you to easily check your
training data during your ride. Change the training views with a
* If you bought your V650 without a heart rate sensor, not to
quick swipe across the screen.
worry, you can buy one at any time.
1. Moisten the electrode area of
the strap.
2. Clip the strap around your
chest and adjust the strap to
fit snugly. 10:45
DURATION
3. Attach the connector.
4. Before your first training
session, you need to pair the
DISTANCE [km]
heart rate sensor with your
V650. Wear your heart rate
sensor and go to Settings >
SPEED [km/h]
General settings > Pairing >
Pair new device.
ALTITUDE [m]
114
After training, detach the heart rate sensor connector and
rinse the strap under running water to keep it clean. For more
detailed instructions, see the V650 support pages at
support.polar.com/en/V650.
100%
01:56:15
68.25
INCLINE [%]
34.8 5
The red triangle
indicates that you can
quickly toggle the
information shown,
from speed to average
speed, for example.
Press the front button
to pause your training.
Then you can choose
to Continue or to Stop
recording the session.