Class Selection And Edit Screen - Korg GEC3 User Manual

Shared Tab
2. Select from the following fields:
Field
Teacher
Teacher
Note 1 thru
Teacher
Note 6
Back
3. Press Disk to open the Disk tab.
4. Press Save Global Setup to save changes.

Class Selection and Edit Screen

The Class Selection and Edit Screen can be accessed from the Global tab. Class information
can be set up for up to 128 classes on the GEC3. The class name is setup on this screen. All
the other class setup and features for a class must be associated with this class name;
therefore, you will always select the class you wish to edit or modify here, before setting other
options.
How to Edit Class Information
1. From the Global tab, press on the arrow next to the Teacher's Name field and select the
teacher who's list of classes you would like displayed.
2. Press on the arrow next to the Edit Class Info field. The following screen displays, listing
all the classes associated with the selected teacher.
78
Description
The name of the teacher that is being edited. This field is blank if you are
adding a new teacher. Press the T to access the QWERTY Keypad to enter a
name in this field, or to edit an existing entry. See the section QWERTY
Keypad in Basics for instructions on how to use the keypad.
You can add notes on the Teacher Info screen. Press the T to access the
QWERTY Keypad to enter or edit a note this field. See the section QWERTY
Keypad in Basics for instructions on how to use the keypad.
Press to close the screen.