Audio Cables For The Gec3 - Korg GEC3 User Manual

Note:
SI Boxes (student units) should only be connected or disconnected while the GEC3 teacher
unit is turned off. The GEC3 teacher unit establishes connection with the student units when
the GEC3 is powered on. DO NOT PLUG OR UNPLUG SI BOXES (STUDENT UNITS)
WHILE THE GEC3 IS TURNED ON. Permanent damage to the GEC3 and/or the SI boxes
may occur if student units are plugged or unplugged into the system when the GEC3 is turned
on.
SI box #1

Audio Cables for the GEC3

All GEC3 audio connections (connections at the teacher controller) are configured as stereo
RCA inputs and outputs. The GEC3 Teacher unit accepts the following audio inputs:
•
Teacher Instrument – audio from a MIDI keyboard, guitar (with preamp), sound module,
computer soundcard, or any stereo line level source. Since the GEC3 automatically
routes the Teacher Instrument to the student stations in many situations, it should
be the teacher's primary instrument.
•
Auxiliary Input 1 – audio from a CD player, tape player, computer soundcard, or any
stereo line level source.
20
SI box #2 SI box #3
GEC3
SI box #4 SI box #5
Quick Start
SI box #6
etc. . .