Korg GEC3 User Manual page 49

OR
If desired teacher name is not listed, add the teacher name using the Edit Teacher
Information screen, described in the Global chapter.
3. Select class name from Class field.
Eavesdrop on a student
1. Press a student's name to eavesdrop on that student.
OR
If you are using the Split Feature, press the A or B button, then select the keyboard group
containing the student on which you want to eavesdrop. For example, to select Ted, press
B and then keyboard group 4. You can also select the Keyboard group first, and then
press A or B. If split function is not in use, A + B is selected, and there is no need to
make a selection using these buttons.
You will be able to hear that student's mic and instrument, but they will not be able to
hear yours, and they will not be aware that you can hear their instrument or mic. The
student keyboard group will be highlighted on your GEC3 unit to indicate that you are
eavesdropping on that student.
2. If you have an expanded GEC3, which can accommodate up to 32 workstations, students
from a different set of 16 (17-32, 33-48), can be accessed by scrolling to that screen to
access the student's name.
3. To end communication, press the Practice Mode button.
OR
to establish two-way communication, see the procedure Establish two-way
communication with a student, below.
Establish two-way communication with a student
1. Press on a student's name twice to establish 2-way communication with the student. Not
only will you be able to hear the student, but they will also be able to hear you.
A small microphone displays next to the student with which you have 2-way
communication. It looks like this:
Note:
If you are using the Split Feature and you have established two-way communication with a
student, you can use the A and B buttons below the Touch Screen to toggle between listening
to student A and student B. Although the students will not be able to hear each other, they will
Practice Mode
49