Setup Tab; Configuration Screen (Setup Tab) - Korg GEC3 User Manual

Group Mode

Setup Tab

The Setup tab looks like the Play tab. Regardless of what mode you are in, you can use it to
assign student names to SI units in the GEC3. In Group mode, you can also use the Setup tab
to customize and save student groups for each class.
In Group mode, the Setup tab looks like this:
Figure 14
Procedures for group setup require you to use the Group Setup and Configuration screens,
both accessed from the Setup tab, and described below.

Configuration Screen (Setup tab)

The Configuration screen can be accessed from the Setup tab in Group mode via the text
(button) on the top right corner of each student group box. When no group is assigned, the
text reads OFF. If the student has been assigned to a group, the name of the active
configuration appears (for example, Duet, Config 1 or the name of a custom configured
group).
Use this screen, in conjunction with the Group Setup screen, to assign students to permanent
groups that you can later recall. You can assign groups other than duet or quartet, or make
modifications to existing default group settings. For example, use this screen if you want
59