Korg GEC3 User Manual page 25

2. Press the Play tab from the row of tabs at the bottom of the screen.
3. Press the number corresponding to where a student is sitting in the classroom twice.
4. To end communication, press the Practice Mode button or select another student.
How to link student workstations into "Duets" and "Quartets" for peer
learning/collaboration
Setting duets automatically groups students in pairs according to student workstation number.
For example, students at workstation 1 and workstation 2 are grouped, students at workstation
3 and workstation 4 are grouped, etc. If the number of students is uneven, you can add the
unmatched student into any group you wish from the main group tab (see Group Screen in the
Group Mode chapter). Quartet Automatically groups students in fours according to
workstation number. For example, students at workstation 1, workstation 2, workstation 3 and
workstation 4 are grouped, students at workstation 5, workstation 6, workstation 7 and
workstation 8 are grouped, etc. If the number of students is not divisible by four, you can add
the unmatched students into groups from the main group tab (see Group Screen in the Group
Mode chapter).
1. Press the Group mode button.
2. Press the Play tab from the row of tabs at the bottom of the screen.
3. Press the dropdown arrow on the top right corner of the Play tab. The Load Group screen
displays, listing the default configurations and any custom configured groups (see the
Setup tab section in the Group Mode chapter for information on how to configure
permanent groups).
4. Select from duet or quartet (if you want to select custom groups, see the section Setup
Tab, in the Group Mode chapter). Once you have made your selection, press Back to
close the screen.
5. Press BACK to return to the Setup screen.
Students are now grouped into pairs or quartets.
How to make sure every student in the class is listening to you.
The All Call button appears at the bottom of the screen on every screen. Press it to route
signal from your mic to every headphone set connected in the studio or classroom. This is the
quickest way to establish communication with the students, and it is convenient when you are
in any mode other than Lecture mode.
By pressing the All Call button, you turn off all student instruments and student will hear you
(the teacher) and your instrument only. All other audio present in the system is disabled –
students can only hear you.
Quick Start
25