Figure 4
4.
Press the T next to the Teacher field to access the QWERTY Keypad to enter a name in
this field. See the section QWERTY Keypad in Basics for instructions on how to use the
keypad.
5.
Enter the desired name using the QWERTY Keypad.
6.
Press Back to return to the Teacher Selection and Edit screen. Repeat steps 2 through 5
until you have added all the desired teachers.
7.
Press Back twice to return to the main tab.
8.
Press Disc to open the Disc tab.
9.
Press Save Global Setup to save changes.
Adding Class Names
Class information can be set up for up to 128 classes on the GEC3. All the other class setup
and features for a class must be associated with this class name. It does not matter which
mode you are in.
1.
Open the Global tab by pressing Global from the row of tabs at the bottom of the screen.
2.
Press on the arrow next to the Teacher's Name field to select the teacher who's list of
classes you would like to create. (Classes are always assigned to a teacher.)
3.
Press on the arrow next to the Class field. The following screen displays, listing all
classes and undefined classes associated with the selected teacher.
Class & Teacher Preferences, Class Setup
33