Load Group Screen - Korg GEC3 User Manual

Group Mode
Note:
If you are eavesdropping on or communicating with a group and you press on a student in
another student group, you will end your session with the first group, as you cannot
eavesdrop on or communicate with more than one group at a time in Group mode.

Load Group Screen

The Load Group screen can be accessed from the Play tab in Group mode via the small
dropdown arrow in the top right corner of the screen. The name of the active configuration
appears next to the arrow (for example, Duet, Config 1 or the name of a custom configured
group).
How to load group info
1. Press the dropdown arrow on the top right corner of the Play tab. The following screen
displays, listing all the default configurations and any custom configured groups (up to 4
custom groups can be created for each class stored in the GEC3 - see the Setup tab
section in this chapter for information on how to configure custom, recallable groups).
The Load Group screen displays. It looks like this:
Figure 12
2. Select from the following fields:
56