Fields; Group Setup Procedures (How To - Korg GEC3 User Manual

Fields

Button/Field Description
Config 1 Select a group for which you want to perform any of the below lis ted
thru activities. For example, select Config 2 if you want to save the displayed
Config 4 settings on Setup screen (Using Save Config As option, described below) as
Config 2. To save the system configuration, once you have assigned students
to groups using the Configuration screen. Stores a copy of all assigned groups
for later retrieval.
Load Config Use to upload a previously set group configuration. You might want to use
this option if you need to change previously assigned groups.
Save Config Use to save configuration currently set on Setup screen, to the selected
As configuration option (Config 1 thru Config 4, described above).
Rename Use to rename a configuration. This can be done at any time, before or after
Config T saving a configuration. You might want to use this option if student groups
use assigned names (EG, colors, composers, instruments, etc...) for group
names, as opposed to group numbers.
Back Press to return to the Setup screen.

Group Setup Procedures (How to...)

Save a group configuration
1. From the Setup screen, press the button on the top right corner of the first student you
want to assign to the group. The Configuration screen displays, listing all the possible
groups to which you can assign the student.
2. Select the group you want the student to belong to.
3. Once you have made your selection, press BACK to close the screen.
The group you selected will appear on the top right corner of the student group box.
4. Repeat steps one thru three until you have assigned each student you wish to the group.
5. When you are finished, begin assigning students to the next group.
6. When you have assigned all students to groups as desired, press the dropdown arrow in
the top right corner of the Setup tab to open the Group Setup screen
7. Select the desired configuration (EG: Config 1)
Group Mode
61