How To - Korg GEC3 User Manual

How to...

Eavesdrop on a group
1. Press any student's name (who is part of the group on which you want to eavesdrop).
You will be able to hear every student who is part of that group's mics and instruments,
but they will not be able to hear you, and they will not be aware that you can hear their
instruments and mics.
2. To end eavesdropping, press the Group Mode button.
OR
To end eavesdropping on that group and begin eavesdropping on another group, simply
press a student belonging to that other group,
OR
to establish two-way communication, simply press a second time on a students name
belonging to the group you are eavesdropping on.
Establish two-way communication with a group
1. Press on a student's name twice to establish 2-way communication with each member of
the group that student belongs to. Not only will you be able to hear the students, but they
will also be able to hear you.
A small microphone displays next to each student with which you have 2-way
communication (each member of the group). It looks like this:
2. To end communication, press the Group Mode button.
Communicate with a group (when a member called from their SI)
1. If Call Enabled is selected in Class Preferences on the Global tab, a student can press
the Call button on their Student Interface (SI) to send an audible beep to your headset.
The word "CALL" appears next to the name of the student on the display, indicating that
the student or group would like to communicate with you.
2. See how to Establish two-way communication with a group, above, to communicate with
that student.
Group Mode
55