Group Setup Screen - Korg GEC3 User Manual

Group Mode
students #2, #5 and # 7 to be in a group that you can later recall. Groups that are assigned via
this screen are named (by default, Config 1, Config 2, etc. that can be changed to custom
names) and can be recalled for later use. To configure temporary groups that do not need to be
saved for later recall, see the section Play Tab in this chapter.
The Configuration screen looks like this:
Figure 15

Group Setup Screen

The Load Group screen can be accessed from the Setup tab in Group mode via the small
dropdown arrow in the top right corner of the screen. The name of the active configuration
appears next to the arrow (for example, Duet or Config 1).
Use this screen, in conjunction with the Configuration screen, to assign students to permanent
groups that you can later recall.
The Group Setup screen looks like this:
Figure 16
60