Back Panel - Korg GEC3 User Manual

If you are not using the Split Feature, A+B is active by default, and you do not have use for
these buttons.

Back Panel

The Back Panel of the GEC3 is where all connections to Student Communication Interfaces,
keyboards and external devices are made. The back panel looks like this:
Fields
Switch/Socket Description
Power switch Toggle switch, powers unit on/off.
AC power Socket for connecting AC power cord to deliver power to GEC3 unit. Works
socket with standard AC 110 Watt, 60 Hertz plug.
Supports power supply ranging from 90 to 230Volts AC and 47 to 63 Hz.
INSTR. IN Dual RCA stereo jacks for connecting cable to instrument providing input.
L/R
AUX IN L/R Dual RCA stereo jacks for connecting cables to auxiliary input. Routes from
auxiliary source into GEC3. Store the name of this device in the Aux1
device field on Volume tab (see How to Setup an Auxiliary Source in the
Volume tab section of this manual).
AUX IN 2 L/R Dual RCA stereo Jacks for connecting cables to tape deck or other auxiliary
unit. Routes from tape deck or other auxiliary source into GEC3. Store the
name of this device in the Aux 2 device field on Volume tab. (See How to
Setup an Auxiliary Source in the Volume tab section of this manual).
TAPE OUT Dual RCA stereo Jacks for connecting cables to tape deck or other auxiliary
L/R unit. Routes from GEC3 to tape deck or other auxiliary source. This enables
recording from GEC3 to the second auxiliary (Aux2) device.
Meet the GEC3
15