Class & Teacher Preferences, Class Setup; Adding Teacher Names - Korg GEC3 User Manual

Class & Teacher Preferences, Class Setup
This chapter gives an overview of how to set up the GEC3 if you are administering the system
or just setting up your own classes.
When you (the administrator or teacher responsible for administration) first get your GEC3
unit, you will want to add the names of the teachers and classes that will be used, assign
teacher and class preferences to each of these and then setup classes that you will be teaching
(or are in charge of administering).
You must add the names of the teachers and classes in order to assign preferences for teachers
and classes and to setup classes.
Setting class and teacher preferences allows you to customize the GEC3 to suite your needs
depending on your needs as a teacher, or the needs of the specific class, if your needs vary
according to classes. In addition, it allows you to set teacher names and assign classes to each
teacher. You need to setup these features in order to set up classes. It is possible to use the
GEC3 and SI Units without first setting up teacher and class preferences; however, you will
then not be able to take full advantage of the GEC3's functionality as all default settings will
be used and you will not be able to setup classes or make notations associated with classes or
students.
It is important to note that each student is associated with a class and each class is associated
with a teacher. It is easiest to perform administration from the bottom up, in the following
sequence:
1. Add the names of the teachers that will be using the GEC3.
2. Add classes to be associated with the set teachers.
3. Assign teacher preferences to each teacher.
4. Assign class preferences to each class (or select to apply teacher preferences).
5. Setup each class using the Setup tab.

Adding Teacher Names

Teacher information can be set up for up to 16 teachers on the GEC3. It does not matter which
mode you are in.
1. Open the Global tab by pressing Global from the row of tabs at the bottom of the screen.
The Global tab looks like this:
Class & Teacher Preferences, Class Setup
31