Korg GEC3 User Manual page 23

These instructions do not show screens, define fields or explain the use of the Split Feature
and MIDI functions. For a more detailed look at each mode and tab, see the corresponding
Mode and Shared Tabs sections of this manual.
How to give a presentation "lecture" and play your teacher instrument
for the class
1. Press the Lecture mode button.
2. Press the Play tab from the row of tabs at the bottom of the screen.
3. To play your instrument to the class, make sure your instrument is plugged in to the
Instrument In connection in the back panel and play your instrument.
How to cue up and play musical examples from CD, tape, or any other
sound source to the class and add your own commentary
This example uses the Aux1 but the procedure is the same for devices plugged into Aux2.
1. Make sure the auxiliary source you want to use is connected to the back panel of your
GEC3. (AUX. IN for Aux 1 device and AUX IN 2 for Aux 2 device).
2. Press the Lecture mode button.
3. Press the Volume tab from the row of tabs at the bottom of the screen.
4. Determine the Auxiliary source (Aux 1 or Aux 2) you want to use.
5. Press (Aux 1) Enable to check it.
6. Press Aux 1 Cue. This will allow you to preview the track before broadcasting to the
class.
7. Cue up the auxiliary source to the desired selection of music.
8. To adjust the volume, use the volume controls corresponding with Aux 1.
9. When music is cued up, press Aux 1 to play the selection.
10. To interject commentary, press the Teacher ON checkbox at the top of the Volume
screen. Aux1/Aux2 volume is decreased by 12 dB (so the your voice can be heard over
the aux. source). Press Teacher ON a second time to uncheck it and resume the original
volume.
How to bring a student and their student instrument(s) into the lecture
so they can share their work and voice with the class
1. Press the Lecture mode button.
2. Press the Play tab from the row of tabs at the bottom of the screen.
Quick Start
23