Technogym Run Excite 500 Service Maintenance Manual page 123

RUN EXCITE: Service & Maintenance Manual - rev. 1.5
Place the tester probes across pins 1 and 3 of connector CN1 of the TGS/Smart Card reader.
(1)
The measured value should be +12 Vdc.
As for step (1) but across pins 1 and 9 of connector CN10 on the digital plan board.
(2)
Use the serial communications test d
(3)
escribed in paragraph 6.1.1.5 "Serial Ports Test".
Page 6.55