Conair TrueBlend TB45-4 User Manual page 59

TrueBlend™
Zero calibration
Press
"0" is displayed for "Actual Weight".
Full calibration
(for service users only!) (Level 3)
Press
bration" screen.
Before the "Full Calibration" screen ap-
pears, you will be reminded that a full cali-
bration cannot be interrupted:
Press "Continue" if you want to pro-
ceed with the full calibration.
or
Press "Abort" to stop the full calibra-
tion.
Make sure that the weigh bin is empty
of material.
Press "Enter" to confirm.
A reference weight of 1250 g is assumed
as the factory setting for a TrueBlend 100
series blender or 750 g for a TrueBlend
045 series model.
Edition: February 2007
.
to open the "Full Cali-
Operation
57