Conair TrueBlend TB45-4 User Manual page 18

Safety
Danger source
Pneumatic seal on the
discharge slide gate
bottom of mix chamber
2
The pneumatic discharge slide gate is not installed if a manual slide gate is installed and the unit is
mounted directly on the injection molding machine.
16
Consequences
Danger of injury by moving parts!
2
at
Horizontally moving pneumatic cylinders can
cause crushing, impact and shearing injuries and
bone fractures.
Do not reach into the pneumatic discharge
slide gate during normal operation and during
manual operation.
TrueBlend™
Edition: February 2007