Conair TrueBlend TB45-4 User Manual page 89

TrueBlend™
In the "Overview" screen press the
TrueBlend icon.
The "TrueBlend Status" screen opens.
Open the "Settings" screen with
Press
Press on the appropriate material hop-
per icon to open the respective vertical
valve.
Removing material
The dispense valve unit is opened and the
material runs out of the material hopper
through the optional deflector to the collec-
tion receptacle.
Discharge the material completely and
clean the material hopper from the top
(use the compressed air nozzle sup-
plied if necessary).
Press on the appropriate material hop-
per icon again to close the dosing unit.
Remove the optional drain chute.
Now you may follow the steps outlined above (cleaning the mixer) to access and
clean the mix chamber and bottom discharge valve.
Edition: February 2007
to switch to "manual mode".
.
Operation
87