Detachable Material Hopper Procedure - Conair TrueBlend TB45-4 User Manual

Safety
Safety device
Safety guard
Safety interlock
switch
EMERGENCY STOP
switch
Padlock

2.6.2 Detachable Material Hopper Procedure

Detachable material hopper for TB45 (4 bins) TB100 (2 bins) and
TB250R-4 (2 bins) models.
NOTE
All detachable material hoppers on the above referenced models are held in place
with a captive retainer (screw) held in the hopper support frame. The retainer
stabilizes the detachable hopper when mounted in the blender support frame from
forces exerted on the hopper by resin weight and various types of automatic
loading/receiving device(s) during normal vibration from the process. There is a
separate retainer for each detachable hopper.
When removing any of these detachable hoppers for cleaning or material
changeover; first, remove the automatic loading/receiving device; then use the
proper hex head socket or screwdriver and back out the captive retainer. Hopper
can then be removed.
Upon re-insertion of the detachable hopper, it is very important to re-anchor
the respective hopper(s) using the captive retainer to provide stability
during normal operation of the blender. Once the hoppers have been placed
and anchored, the respective loading / receiving devices can be mounted.
18
Safety function
Prevents injury by crushing and impact at the pneu-
matic cylinder of the supply hopper.
Stops the mixer motor when the main door is opened.
Stops all movement of the machine.
Locks the switch to prevent unauthorized persons
switching it on.
TrueBlend™
Edition: February 2007