Table of Contents
Advertisement
About TRBOnet Swift A200
2.3
Restrictions
1. Due to changes introduced by Motorola into recent MOTOTRBO firmware, we do
not recommend that you use the A200 gateway in the wireless (NRF) mode in
conjunction with MOTOTRBO radios that have firmware version 2.60 and higher.
The latest firmware that can be used in this mode is 2.05.60. The A200 gateway
can work with newer firmware in the wired (USB) mode.
2. The A200 gateway in the wireless (NRF) mode does not support revert channels
and data repeaters. The A200 gateway in the wired (USB) mode must be used
instead.
3. We do not recommend to install any Swift IP Gateways in the same subnet as
trunked repeaters (applies to Capacity Plus and Linked Capacity Plus).
2.4
Package Contents
The package contents of TRBOnet Swift A200 include the following items:
Item
TRBOnet Swift A200
TRBOnet Swift Transfer ST002
Flex cable
Micro-USB <> USB cable
USB <> RADIO cable
Audio cable
Micro-Fit connector system
Screw kit
Passport
Table 1: TRBOnet Swift A200 package contents
A radio-over-IP gateway unit with a factory-installed
MicroSD card (4 Gb or more) and a CR1220 battery.
An option board for a MOTOTRBO radio.
A flex cable for connecting the option board to the
main board of a MOTOTRBO radio.
A programming cable.
A service cable for connecting a MOTOTRBO radio to
the A200 gateway.
An audio cable (in and out) for connecting a non-
MOTOTRBO two-way radio to the A200 gateway.
A Micro-Fit plug and a wire kit for connecting the
A200 gateway to a non-MOTOTRBO two-way radio, a
12V DC power supply, and external hardware.
Technical documentation for TRBOnet Swift Agent
A200.
Description
Quantity
1
1
1
1
1
1
1
1
1
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Swift A200 and is the answer not in the manual?
Questions and answers