Restrictions; Delivery Kit - TRBOnet Swift A200 User Manual

About Swift A200
2.3

Restrictions

1. Due to changes introduced by Motorola into recent MOTOTRBO firmware, we do
not recommend that you use Swift IP Gateways A001, A002 and A200 in the
wireless (NRF) mode in conjunction with MOTOTRBO radios that have firmware
version 2.60 and higher. The latest firmware that can be used in this mode is
2.05.60. The A200 Gateway can work with newer firmware in the wired (USB)
mode. Please do not update your control radios beyond this version number if you
have A001 or A002 in the wireless (NRF) mode.
2. Swift IP Gateways A001, A002 and A200 in the wireless (NRF) mode do not
support revert channels and data repeaters. The A200 Gateway in the wired (USB)
mode must be used instead.
3. We do not recommend to install any Swift IP Gateways in the same subnet as
trunked repeaters (applies to Capacity Plus and Linked Capacity Plus).
2.4

Delivery Kit

TRBOnet Swift A200 delivery kit includes accessories listed in Table 1.
Item
TRBOnet Swift A200
TRBOnet Swift Transfer ST002
Flex cable
Micro-USB <> USB cable
USB <> RADIO cable
Audio cable
Micro-Fit connector system
Screw kit
Passport
Table 1: TRBOnet Swift A200 delivery kit
Description
A radio-over-IP gateway unit with a factory-installed
MicroSD card (4 Gb or more) and a CR1220 battery.
An option board for a MOTOTRBO radio.
A flex cable for connecting the option board to the
main board of a MOTOTRBO radio.
A programming cable.
A service cable for connecting a MOTOTRBO radio to
Swift A200.
An audio cable (in and out) for connecting a non-
MOTOTRBO two-way radio to Swift A200.
A Micro-Fit plug and a wire kit for connecting Swift
A200 to a non-MOTOTRBO two-way radio, a 12V DC
power supply, and external hardware.
Quantity
1
1
1
1
1
1
1
1
1
3