Setting The Operating Mode; Reset - Reset The Radio; Settings For The Multi Controller - Silvercrest KH 2381 Operating Instructions Manual

Note
When you are not receiving any RDS or PTY
information, "PS NONE" or "PTY NONE" is
shown in the display. Each notice only appears
for a few seconds.

Setting the operating mode

LD/MD
• Press the button
control) to switch between radio reception (fre-
quency display), CD/MP3/WMA mode (CD),
card slot (SD/MMC), USB port (USB) and audio
input (AUX).
Note
The operating modes CD, SD/MMC and USB
can only be accessed when the corresponding
medium is inserted.

RESET - Reset the radio

• To reset the car radio to its factor default settings,
RESET
press the button with a pointed object, such
as a pen.
The theft protection LED goes out while the
is pressed.
• Reset the car radio:
- at initial operation,
- after the cable connection,
- if not all function buttons are working
- when an error message appears in the display.

Settings for the multi controller

Via the multi controller you can also adjust settings
for the switch on volume, time of day settings, traffic
radio volume, EON function, recording format and
the equalizer.
• Hold down the multi controller for approx.
2 seconds and then press it several times to
access the following settings:
INVOL - switch on volume
• Turn the multi controller in order to set a volume
level, which will apply when the car radio is
switched on.
MODE/LOUD
( on the remote
RESET
button
ADJ - Time of day
Your car radio is equipped with an RDS controlled
clock. The clock sets itself automatically when the
EON function is switched on and also continues
to run when the radio is switched off. If you do not
receive any RDS signal you can also set the time of
day manually.
• Turn the multi controller to the right to set the
hours and to the left to set the minutes.
TAVOL - Volume for traffic radio
• Turn the multi controller in order to set a volume
level, which will apply when the traffic report is
switched on.
EON - Function
Turn the multi controller in order to switch the EON
function on (EON ON) or off (EON OFF). When
the EON function is switched on the radio switches
to traffic radio or PTY types if the TA or PTY function
has been switched on.
REC - Recording format
• Turn the multi controller to set the record format
for recording on SD/MMC and/or USB data
carriers, MP3 (MP3 data) or WMA (Windows
Media Audio).
DSP - Equalizer
• Turn the multi controller to select one of the set-
tings DSP CLASS, DSP ROCK, DSP POP, DSP
FLAT or DSP NONE. In the setting DSP NONE
no Digital Sound Processing (DSP) is switched on.
The DSP equalizer setting is shown at the bottom of
the display.
Note
When the DSP equalizer is on, the settings
for BASS and TREBLE are not available.
- 11 -