Ta ("Traffic Announcement") - Traffic Radio; Playing Audio Cds; Inserting And Removing Cds; Title Skip - Silvercrest KH 2381 Operating Instructions Manual

TA ("Traffic Announcement") -
TRAFFIC RADIO
For this function the EON function must be switched
on.
• Briefly press the button
control) to switch this mode on or off.
In the TA mode the device will immediately switch
from other stations or operation types to the radio
station, which is currently broadcasting traffic infor-
mation. With this the volume level entered under
TAVOL will be set.
The TA function can be stopped during the play-
back of traffic information, without switching off the
TA mode, by pressing the

Playing audio CDs

ESP "Electric Shock Protection"
The device is equipped with an anti shock function.
This function serves to compensate for vibrations,
for example on uneven streets, and to provide
an uninterrupted playback even with device
movement. When the device is switched on
the memory automatically fills with data:
– with audio CDs for 10 seconds;
– with MP3-CDs for 120 seconds.
Further information for CD operation
Dampness and high humidity can cause the
CD player to malfunction. In this case switch on
the vehicle heating to dissipate the dampness
before using the device. Do not subject the CD
player to any extremely high or low temperatures.
TA TA/TP
( on the remote
TA
button again.

Inserting and removing CDs

• fold the face plate downward by pressing the
face plate's unlocking device.
• Push the CD into the CD slot with the inscribed
side facing up.
• Lock the face plate back into place by folding
it upwards. Playback of the CD begins. TOC
READ appears in the display (Read directory
contents).
• To remove the CD open the face plate again. Press
the button . The CD will be ejected. The car
radio switches to radio mode.
Attention!
Do not drive with an ejected CD. Immediately
remove the CD from the CD slot.
If an ejected CD is not removed within approx.
5 seconds the device will draw it back in,
however playback of the CD will not start.

Title skip

• By means of the button
the next and/or the previous title. The title number
will be shown in the display.

Fast forward/backward

• Hold down the buttons
fast forward or backward.

Stopping a CD

• You can stop the playback with the
To continue playback press the
more.

Repeating a title

RPT/2
• Press the button. RPT ONE is shown in the
display followed by RPT. The current title is re-
peated.
RPT/2
Press the button again. RPT ALL appears briefly
in the display. The entire disc is then played back
on repeat. This is the normal playback function.
The RPT indicator goes out.
- 14 -
or you can select
or longer to start
PAU/1
button.
PAU/1
button once