Radio functions
Selecting the band range
BD/ENT
BAND/ENTER
• Press the button
(
on the remote
control) to switch between USW (FM1, FM2,
FM3) and medium wave (MW1, MW2).
Automatic station search
• Press briefly the search buttons
or
to start
a search forwards/backwards. The search stops
at the next station found.
Manual station selection
• When you hold down one of the buttons
or
for two seconds you switch to manual station
search. MANUAL appears in the display.
• Now press the search buttons
or
several
times to set the frequency in steps of 0.05 MHz
(MW: 9 kHz) up/down.
If no button is pressed for approx. two seconds the
automatic station search is set again. AUTO appears in
the display.
Programming stations
BD/ENT
BAND/ENTER
• Press the button
(
on the remote
control) to select a band range.
In each range you can save six stations.
• Search for the station that you want to save.
• After the search has found a station press one of
the station buttons 1-6 for approx. three seconds.
The brief switching off of the sound indicates that
the station is saved. In addition to the radio frequency,
the number of the memory position is also displayed.
The device switches back to radio playback after a
few seconds.