Ems Accessories - Lenze 8400 protec Hardware Manual

L-force drives
Table of Contents

Advertisement

12
Accessories (overview)

EMS accessories

12.8
EMS accessories
LDEZHMTX − half wave transmission module
ƒ
Interface module for the half−wave command selection (transmission module) via a
control bar between the mobile control at the vehicle and the stationary system. The
connection of up to 8 channels is possible.
LDEZHMRX − half wave reception module
ƒ
Interface module for the half−wave feedback (reception module) via a signalling bar
between the mobile control at the vehicle and the stationary system. The connection
of up to 8 channels is possible.
LDEZPW10238Kxx − Power wave
ƒ
Communication module with up to 1023 commands for data exchange between the
stationary system centre and the mobile control at the vehicle. For communicating
with the central PLC, PROFIBUS−DP, DeviceNet or INTERBUS CU are available.
LDEZLDC1Kxx − rail bus local data concentrator
ƒ
Communication module (master) for data exchange between the system PLC and the
bus transfer unit on the rail bus or inductive data transfer. Depending on the
communication medium, an LDEZLMDC (contact conductor rail bus) or an LDEZLMIDAT
(inductive data transfer) interface can be connected.
LDEZLMDC − rail bus CAN bus driver module
ƒ
Interface module − CAN bus driver for the rail bus, (implementation TTL −> 50 V DC) for
plugging onto the data concentrator (master − bus transfer unit) LDEZLDC1KPB,
LDC1KDN, for bidirectional data exchange with mobile control.
LDEZIRDS − infrared station with fieldbus link
ƒ
The infrared station is used for bidirectional data exchange between the stationary
system PLC and the mobile control at the vehicle.
Vehicle−specific process data and maintenance data can be transmitted.
Communication is possible with central PLC via PROFINET I/O, (PROFIBUS DP,
EtherNet /IP and DeviceNet on request).
LDEZEXIRD − external infrared module (remote control receiver with LED display)
ƒ
The external infrared module serves to be connected to a Lenze control system
CCU/ICU series with LDEZDrive PLCC and is an external display as well as an infrared
remote control receiver. The connection to the LDEZDPLCC is made via the system bus
(CAN) which provides the option to mount it to any position of the vehicle.
188
l
EDS84DPS424 EN 5.0

Advertisement

Table of Contents
loading

Table of Contents