Table of Contents
Advertisement
10
Diagnostics
Display of operating data, diagnostics
Drive diagnostics
10.1.5
Drive diagnostics
The controller measures relevant operating parameters which can be displayed using the
diagnosis terminal or the PC.
Display of the controller status on the keypad
Icon
d
—
˜
™
š
›
¥
¦
§
œ
Ÿ
¡
¢
170
– If the keypad at the front of the controller is connected to the
diagnostic interface X6, the area of the LCD displays the
controller status via different symbols.
Meaning
Controller is switched on.
Controller is enabled.
Application in the controller is stopped.
Quick stop is active.
Controller is inhibited.
Controller is ready to start
Speed controller 1 in the limitation
The set current limit is exceeded in motor
or generator mode
Pulse inhibit is active
System fault is active
Fault
Trouble
TroubleQSP
Warning is active
l
Note
à
"SwitchedON" state
The power outputs are inhibited.
à
"ReadyToSwitchOn" state
The drive is torque−controlled.
The power outputs are inhibited.
à
"Fault" state
à
"Trouble" state
à
"TroubleQSP" state
à
"Warning" status display
EDS84DPS424 EN 5.0
Advertisement
Table of Contents
