Commissioning - Lenze 8400 protec Hardware Manual

8

Commissioning

8 Commissioning
)
Note!
ƒ
ƒ
}
Danger!
Uncontrolled motor movements may occur
Under certain conditions, the motor may rotate after mains connection.
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
ƒ
138
Please observe the general safety instructions (¶ 13).
Please observe the notes regarding residual hazards (¶ 19).
Near the machine or plant, situations may arise that are hazardous to
persons.
The machine or plant may be damaged by an unexpected start.
Commissioning with external 24 V supply and without mains voltage
Remove motor connector X21. An active motor temperature monitoring
prevents a motor voltage from being output. If the monitoring is
deactivated, a voltage may be applied at the plug.
Ensure that no setpoint is applied.
l
EDS84DPS424 EN 5.0